|The ChrisCo Model 150 Single
Head Haunching Machine is a heavy duty machine designed for all types of
haunching, shaping, notching, profiling, finger jointing and lock jointing
operations. The worktable is stationary with a traveling spindle. The air
holddown has a safety shut down switch.
The Model 150 utilizes full hydraulics
to control the movement of the cutterhead spindle. A flow valve provides
a slow down feature to provide the absolute best results with less tear-out
of cross grain work and the return stroke is at full speed.
The spindle has four precision
bearings for long working life. Travel is on hardened linear bearings.
A cast iron stand and housing absorbs vibration.
A microprocessor provides a
home-up or a home-down selection to give optimum performance.
- 10 HP motor - belted
to spindle 220/440 volts
- Electronic motor
brakes - trip wire controlled
- 1-¼" arbor
- right hand with 6" cutterhead capacity
- Up to 10"
maximum cutting circle of tooling
- 4200 RPM spindle
- Maximum cutting
thickness: 4" with 3" diameter air holddown
- Air holddown with
low pressure shut-down safety switch
- Hydraulic movement
of the cutterhead with 1 HP hydraulic unit
- Slow speed control
"in the cut"
- Foot pedal cycle
- 110 volt control
circuit with emergency stop button
- Home-up or home-down
positioning control for the cutterhead
- Table top 16"